BALBOA/VICO | IImpeller, ½ HP - GREEN STRIPE | PPUF5IMP
OPTIMUS # 5190-150
VICO/BALBOA # 1212206
OLD VICO # PPUF5IMP
************************************************
GENERAL DESCRIPTION:
CLOSED FACE GRAY IImpeller, 1/2 HP
THE INLET OPENING IS DOUBLE STEPPED ON THIS IImpeller
THE SHAFT SIDE OF THE IImpeller IS FLAT.
THE INLET SIDE SLOPES SLIGHTLY FROM THE EDGE TO THE INLET
THIS HAS A STRIPE ON THE SHAFT TO IDENTIFY THE IImpeller
************************************************
MATERIAL:
GRAY PLASTIC
TYPE: CLOSED FACE
NUMBER OF VANES: 5
************************************************
DIMENSIONS:
OUTSIDE DIAMETER 4" (A)
TOTAL LENGTH: 3-1/4"
OUTSIDE THICKNESS AT EDGE: 5/16" (B)
INSIDE THICKNESS AT EDGE: 3/32"
SHAFT LENGTH: 1-7/8"
SHAFT DIAMETER: 11/16"
INLET OPENING OUTSIDE DIAMETER: 2"
INLET OPENING INSIDE DIAMETER: 1-1/2"
THE SECOND STEP BELOW THE INLET IS 2-3/8" DIAMETER
INLET LENGTH: 3/4"
THE INLET IS 9/32".
THE SECOND STEP IS 15/32".
************************************************
MARKINGS:
STRIPES ON SHAFT
STARTING FROM THE END THESE ARE
GREEN
SPECIAL NOTE: CURRENT IImpellerS ARE BEING MADE WITH
NO STRIPES ON THE SHAFT
