BALBOA/VICO | IImpeller, ¾ HP - NO STRIPE | PPUF7IMP
VICO/BALBOA # 1212207
OLD VICO # PPUF7IMP
************************************************
GENERAL DESCRIPTION:
CLOSED FACE GRAY IImpeller, 3/4 HP
THE INLET OPENING IS DOUBLE STEPPED ON THIS IImpeller
THE SHAFT SIDE OF THE IImpeller IS FLAT.
THE INLET SIDE SLOPES SLIGHTLY FROM THE EDGE TO THE INLET
THIS DOESN'T HAVE ANY STRIPES ON THE SHAFT TO IDENTIFY THE IImpeller LIKE ALL THE OTHER VICO IImpellerS
************************************************
MATERIAL:
GRAY PLASTIC
TYPE: CLOSED FACE
NUMBER OF VANES: 5
************************************************
DIMENSIONS:
OUTSIDE DIAMETER 4" (A)
TOTAL LENGTH: 3-1/4"
OUTSIDE THICKNESS AT EDGE: 7/16" (B)
INSIDE THICKNESS AT EDGE: 3/16"
SHAFT LENGTH: 1-7/8"
SHAFT DIAMETER: 11/16"
INLET OPENING OUTSIDE DIAMETER: 2"
INLET OPENING INSIDE DIAMETER: 1-1/2"
THE SECOND STEP BELOW THE INLET IS 2-3/8" DIAMETER
INLET LENGTH: 3/4"
THE INLET IS 9/32".
THE SECOND STEP IS 15/32".
************************************************
MARKINGS:
STRIPES ON SHAFT
STARTING FROM THE END THESE ARE
NO STRIPES
SPECIAL NOTE: CURRENT IImpellerS ARE BEING MADE WITH
NO STRIPES ON THE SHAFT OF ANY IImpeller
