HAYWARD | GASKET | SPX1090E
GENERAL DESCRIPTION:
THIS IS A HAYWARD PRODUCTS STANDARD SMALL SKIMMER FACEPLATE GASKET
MATERIAL:
CARDBOARD
SHAPE: RECTANGULAR WITH A TOTAL OF 10 SCREW HOLES AND 2 EXTRA HOLES
THERE ARE 3 SCREW HOLES ON THE TOP AND THE BOTTOM
THERE ARE 2 SCREW HOLES AND ONE EXTRA HOLE ON EACH SIDE.
*******************************************************************************
DIMENSIONS:
OUTSIDE LENGTH: 8-1/8" (A)
OUTSIDE HEIGHT: 8" (B)
INSIDE LENGTH: 5-7/8"
INSIDE HEIGHT: 5-3/4"
*******************************************************************************
SCREW HOLES: THESE ARE 1/4" IN DIAMETER
EXTRA HOLES: THESE ARE 1/2" IN DIAMETER
TOP AND BOTTOM:
THERE IS A SCREW HOLE IN THE CENTER
THE 2 SCREW HOLES NEXT TO THE CENTER HOLE ARE 2-3/8" FROM THE CENTER HOLE
SIDE:
THERE IS AN EXTRA HOLE IN THE CENTER
THERE IS A SCREW HOLE ABOVE AND ONE BELOW THE CENTER HOLE
THE 1/4" SCREW HOLES ARE 1-7/8" APART AT THE CENTER
*******************************************************************************
MARKINGS:
THERE ARE NO MARKINGS
*******************************************************************************
SUBSTITUTES:
THE 4042-06 CARDBOARD GASKET WILL REPLACE THIS, BUT IS SMALLER ON THE OUTSIDE
THE 9381-04 CARDBOARD GASKET WILL REPLACE THIS, BUT IS SMALLER ON THE OUTSIDE
THERE SHOULD BE OTHERS, JUST CHECK THE HOLE PATTERN
NOTE DATE: 5-4-2009
