HAYWARD | BUTTERFLY GASKET | SPX1091G
GENERAL DESCRIPTION:
THIS IS A HAYWARD PRODUCTS STANDARD SMALL SKIMMER FACEPLATE GASKET
THIS IS A RUBBER BUTTERFLY TYPE GASKET
THIS IS ACTUALLY 2 GASKETS JOINED AT THE INSIDE HOLE
THE INSIDE GASKET SLIPS THRU THE WALL SKIMMER OPENING AND THE OUTSIDE
GASKET STAYS ON THE OTHER SIDE OF THE WALL.
THIS IS ALSO KNOWN AS A WALL PROTECTION GASKET, SINCE THE GASKET HELPS
PROTECT THE WALL OPENING
MATERIAL:
WHITE RUBBER
SHAPE: RECTANGULAR WITH A TOTAL OF 16 HOLES
THERE ARE 5 HOLES IN THE TOP AND THE BOTTOM
THERE ARE 3 HOLES ON EACH SIDE.
*******************************************************************************
DIMENSIONS:
OUTSIDE LENGTH: 7-3/8" (A)
OUTSIDE HEIGHT: 7-1/8" (B)
INSIDE LENGTH: 5-3/4"
INSIDE HEIGHT: 5-1/2"
*******************************************************************************
HOLES: THESE ARE 1/4" IN DIAMETER
THESE MEASUREMENTS ARE FROM THE HOLE CENTER TO HOLE CENTER
TOP AND BOTTOM:
THERE IS A HOLE IN THE CENTER
THE 2 HOLES NEXT TO THE CENTER HOLE ARE 1-3/16" FROM THE CENTER HOLE
THE NEXT 2 HOLES ARE 1-3/16" FROM THESE
SIDE:
THERE IS A HOLE IN THE CENTER
THERE IS A HOLE ABOVE AND ONE BELOW THE CENTER HOLE
THESE ARE 1-1/16" FROM THE CENTER HOLE
*******************************************************************************
MARKINGS:
THERE ARE NO MARKINGS
*******************************************************************************
SUBSTITUTES:
THE 4031-060 WILL REPLACE THIS BUT NO EXTRA CENTER HOLE ON THE SIDE
THERE SHOULD BE OTHERS, JUST CHECK THE HOLE PATTERN
NOTE DATE: 5-7-2009
